• IUC Technologies combines convenience and functionality in it's new closed circuit control system. The SVS-1000 is the only low voltage (30Vdc Max.), two diver, 19" rack mounted, combination video lamp control and video overlay system currently available.
  • The BIRNS Doubly-Safe Chamber Light™, BIRNS Model 4123, combines powerful LED technology with BIRNS exclusive design features—for the ultimate in safety and performance in brilliant 5200K lighting for PVHO applications.
  • The Amron Model 8120-HP High Pressure - 2 Commercial Diver Air Control and Depth Monitoring System is a system consisting of a two commercial diver depth monitoring system with high accuracy precision gauges and two commercial diver air control manifold housed in a highly durable pressure molded fiberglass case.
  • SUBSALVE USA Commercial Lift Bags are capable of being used by a single diver. These heavy-duty lift bags are ideal for use in light salvage, object recovery, construction, and scientific applications.
  • The DPM72 CO2 Carbon Dioxide analyser is a self-contained modular unit housed in a custom 3u x 1/2 rack width case, that can also be panel mounted.
Home :: Communications :: Amcom™ III 3-Diver Portable Military Version Communicator with Internal Charger

Amcom™ III 3-Diver Portable Military Version Communicator with Internal Charger

Amcom™ III  3-Diver Portable Military Version Communicator with Internal Charger

The Amcom™ III Series 2830A has all of the same features of our Amcom™ II Series Communicators. These superior communicators utilize separate volume controls for each diver and the tender, both for the up-link and down-link paths.

Features

  • Volume setting for each diver and tender to their individual comfort level
  • Divers can be set up on 4-Wire Mode or 2-Wire Mode or any combination of the two modes
  • Ability to use both dynamic and preamplified diver microphones with a unique circuit that detects microphone type and automatically adjusts volume levels
  • Weatherproof panel microphone for greater voice intelligibility
  • Communicator can be left on charge indefinitely without damage to the batteries or communicator
  • Communicator can be operated directly from the charger where AC power is available
  • Enough audio power to support three divers

Rechargeable with Internal Charger: Part Number 2830A/24 Includes

  • Hand-Held Push-to-Talk Microphone: Part Number 2405-28
  • (1) 12VDC Slide Terminal Gel-Cell Rechargeable Battery: Part Number 2890-05 - Expected life: 20 Hrs
  • User Manual

Rechargeable with Internal Charger and MS Connectors: Part Number 2830A/24-MS Includes

  • Hand-Held Push-to-Talk Microphone: Part Number 2405-28
  • (1) 12VDC Slide Terminal Gel-Cell Rechargeable Battery: Part Number 2890-05 - Expected life: 20 Hrs
  • User Manual

Amron International also offers DSP2 Helium Speech Unscramblers and Wireless Tender Options. Please refer to the Related Items Tab for additional information.

Specifications

  • Audio Power Output: 20 Watts per channel
  •  Frequency Response: 500 Hz to 3 kHz
  • Isolation Transformer: Split Bobbin Medical Grade
  • Dimensions: 10 in. H x 9 in. W x 14.5 in. D(25.4 cm x 22.9 cm x 36.8 cm)
  • Weight: (approx.) 22 lbs (9.98 kg)
  • Power: 110/220 VAC 50/60 Hz (automatic sensing), or Internal/External Batteries 12 VDC  

Tech Note

All communicators will transfer topside noise to the diver when using the radio speaker only. To eliminate background noise and achieve clear concise communications, use a push-to-talk microphone or a headset or a remote walk & talk with a headset.

2 and 3 Year Extended Warranties are available for this product. Please refer to the Documents Tab for further information on these programs.

Product FAQ's:

Question: Should I use a GFI when operating my radio off AC power?

Answer: When operating your Amron Diver Communicator on AC, it is critical to use a Ground Fault Circuit Interrupter (GFCI) or isolation transformer for tender and diver safety. Surges and spikes are common on AC lines found on shops, generated locally, or at the end of long extension cable runs and can exceed 1kVolt. Such surges and spikes can cause the fuses, F1 and F2, to blow on the battery charger board and in extreme cases damage the charger circuitry. The battery charger is designed so that such a failure will be isolated and will not cause a safety issue to the tender or divers. It is strongly advised that your Amron Diver Communicator be operated on an AC circuit with a high quality surge arrester or an AC isolation transformer.

Question: When my battery does not appear to be holding a charge, how do I know if the problem is a bad battery or if the charger is broken?

Answer: To determine whether the problem is with the battery or charger you will need to verify if the charger is properly charging the battery.

Troubleshooting: Unplug your communicator and turn on the POWER switch. Measure the voltage across the yellow PUSH-TO-TALK (PTT) jack and write down this value for future reference. It should be greater than 9 Volts. Plug the communicator into an AC source and verify that the AC POWER LED on the front panel turns on. Re-measure the voltage across the PTT jack and note it down for future reference. It should be higher than the previous measurement. If this AC POWER LED does not light up when the communicator is plugged in, then check fuses F1 and F2 on the charger Printed Circuit Assembly (PCA). Allow the communicator to charge overnight. Unplug the communicator and re-measure the voltage across the PTT jack. If it is the same or less than the voltage you measured previously, then the charger is broken and the communicator needs to be sent in for repairs. If the voltage is higher than previous measurement but less than 13.5 Volts, then the battery is bad and needs to be replaced. If it is greater than 13.5 Volts but it still appears that the battery is not holding a charge, contact Amron for additional support.

Question: Can you stack the banana plugs from the diver's communicators cable so you can have two divers on each diver channel?

Answer: Although it may be possible, we strongly discourage such operation. The added workload would cause overheating and stress to the amplifier card. Prolonged use in this condition will eventually cause permanent damage and failure to the amplifier card.

Details
SKU 2830A/24-MS
Quantity in stock No items available
Weight 23.00 lbs
 
Our price: Call For Pricing!
Options
Quantity Item currently out of stock but available for purchase. Please contact for estimated delivery dates, (855) 482-8324.

Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.
: *
: *
: *
Type the characters you see in the picture:


*