- per page
Amron Easy Temperature Monitor
The Amron Model 3129 is a panel mounted 3-1/2 inch digit temperature meter displaying temperature in Fahrenheit or Centigrade. The Model 3129 is used with a RTD Temperature Probe Model 3129-RTD. Unit is supplied ready for panel mounting and has a bezel and mounting bracket. The probe is supplied with a friction mounting collar.
***EXTENDED WARRANTIES ARE AVAILABLE FOR THIS PRODUCT. PLEASE REFER TO THE DOCUMENTS TAB FOR FURTHER INFORMATION ON THE PROGRAM.***
Please call for pricing!
Amron Low Air Pressure Alarm Monitor
Amron's Low Air Pressure Alarm Monitor is designed for monitoring the output of an air compressor or air storage bank and alerts the tender or dive supervisor of a decrease in air pressure to the commercial diver. The Amron Low Pressure Alarm Monitors are self contained modular units, which when connected to an air pressure source will sound an alarm when the air pressure decreases below the set point.
Both a visual and audio indication is provided. A two color L.E.D. on the front panel indicates green when the air pressure is "normal" or above the set point, and changes to red when the air pressure drops below the preset pressure level. At the point at which the air pressure drops below the set point, an audio alarm with a pulsing tone of 2900 Hz, at a level of 90 dB (A) @ 2' is also activated.
The Model 8206 is for air pressure alarm applications and is suitable for maximum systems service pressures of up to 4500 psi. The Model 8206R has a remote pressure sensing switch with 15 feet of cable. See selection chart below. Please note that "J" Range Code is only available in the remote alarm version 8206R.
***EXTENDED WARRANTIES ARE AVAILABLE FOR THE AMRON LOW AIR PRESSURE ALARM MONITOR. PLEASE REFER TO THE BELOW DOCUMENTS TAB FOR FURTHER INFORMATION ON THE PROGRAM***
Amron RTD Temperature Probe
The Amron International Model 3129 is a panel mounted 3-1/2 digit temperature meter displaying temperature in Fahrenheit or Centigrade. The Model 3129 is used with a RTD Temperature Probe Model 3129-RTD. Unit is supplied ready for panel mounting and has a bezel and mounting bracket. The probe is supplied with a friction mounting collar.
Please call for pricing!
DPM72 CO Carbon Monoxide Analyser
The DPM72 CO Carbon Monoxide Analyser is a self-contained unit housed in a custom 3u x 1/4 rack width case that can also be panel mounted.
Please call for pricing!
DPM72 CO2 Carbon Dioxide Analyser
The DPM72 CO2 Carbon Dioxide Analyser is a self-contained modular unit housed in a custom 3u x 1/2 rack width case that can also be panel mounted.
Please call for pricing!
DPM72 T&H (Temperature & Humidity) Analyser
The DPM72 T&H (Temperature & Humidity) Analyser is a modular unit with separate sensor and dual displays housed in a custom 3u x 1/2 rack width case that can also be panel mounted.
Please call for pricing!
DPM72 H2 Hydrogen Analyser
The DPM72 H2 Hydrogen Analyser in a self contained unit housed in a custom 3u x 1/4 rack width case that can also be panel mounted.
Please call for pricing!
DPM72 O2 Oxygen Analyser
The DPM72 O2 Oxygen Analyser in a self contained unit housed in a custom 3u x 1/4 rack width case that can also be panel mounted.
Please call for pricing!
DPM72 O2C (O2 Controller)
This unit uses a high stability Electro-Chemical Sensor with built-in temperature compensation and a programmable display for controlling the concentration of oxygen in an enclosed compartment.
Please call for pricing!
DPM72 T&H (Temperature & Humidity) Analyser
The DPM72 T&H (Temperature & Humidity) Analyser is a modular unit with separate sensor and dual displays housed in a custom 3u x 1/2 rack width case that can also be panel mounted.
Please call for pricing!
- per page