The Amron External Hyperbaric Chamber Conditioning System (Model 9000-ECS) is the supply source for chilled or heated water which is circulated through the Amron Internal Hyperbaric Chamber Conditioning System (Amron Model 9100-ICS2) or any heating/cooling module using water as the media.
The Amron External Hyperbaric Chamber Conditioning System (Model 9000-ECS) is manufactured specifically for heating and cooling double lock decompression chambers. When used in conjunction with one or more internal units, the Amron External Hyperbaric Chamber Conditioning System provides temperature and humidity control by cooling and dehumidifying, or heating the hyperbaric chamber environment.
Optional Amron Remote Control Switch 9000-RCS with 25 ft. of cable permits the remote selection of Heat, Cool, or Power-Off. Single switch for easy installation in control console.
***2 or 3 YEAR EXTENDED WARRANTIES ARE AVAILABLE FOR THIS PRODUCT. PLEASE REFER TO THE ATTACHMENTS TAB FOR FURTHER INFORMATION ON THE PROGRAM.***
The Amron Internal Chamber Conditioning System (Model 9100-ICS2) is designed for use in air decompression chambers and hyperbaric medical chambers. The unit has a single heat exchanger coil which can be used for cooling or heating, depending on the temperature of fluid supplied to the unit. When cool fluid is supplied the unit will provide both cooling and dehumidification of the chamber environment.
Dual fans provide additional cooling and heating power. Both fan motors can be operated during periods when maximum cooling or heating is required, or one motor during periods when the heating/cooling requirements are lower. Larger hyperbaric and decompression chambers do require multiple units for proper distribution of air. All electronics are potted as protection from the effects of pressure and humidity.
The Amron International Chamber Conditioning System is constructed of polished 300 Stainless Steel. The unit is designed to operate in any mounting position and has a field reversible heat exchanger coil permitting the fluid connections to enter from the left or right side of the unit, a feature that allows flexibility for placement inside the chamber.
DISCLAIMER NOTICE: Amron's communications equipment is designed to be used in air chambers where oxygen concentrations remain below 23.5%. Our communications products (including communicators, speakers, entertainment systems, and other communications accessory items) are NOT designed for oxygen service, are not intrinsically safe, and do not meet the criteria given in NFPA-99, Chapter 20 and other applicable definitions. Use of our products in high-concentration Oxygen environments may result in serious injury and/or death.